Improving the Camera Recording Quality

Using your AlertMe, British Gas Hive, Safe & Secure or Iris system.
Post Reply
User avatar
roobarb!
Site Admin
Posts: 205
Joined: Mon Nov 21, 2011 4:56 pm
Location: Manchester, UK
Contact:

Improving the Camera Recording Quality

Post by roobarb! » Wed Jan 11, 2012 11:49 pm

If you've ever thought the recording quality was a bit ropey on the camera, here's an easy way to make it better.

If you use your browser to bring up the camera's web page (as you may have done to set up the wireless configuration) and log in on the Administration link (default username is 'administrator' with no password) you will see a 'Video & Audio' button under the 'Video & Audio' section on the left. Click this and it will give you the settings.

There are two areas for setting the same options for two different stream services; MPEG-4 Settings and MJPEG Settings. The hub uses the MPEG-4 stream (while the camera web page uses MJPEG) and I have mine set to:

Resolution: 640x480
Fixed Quality: Normal
Max Frame Rate: 8 fps

This gives a nice balance between picture quality and file size on the AlertMe servers. I find the defaults are a bit too low quality for my liking.
Alerty - control your AlertMe system with my third-party app for iPhone and iPod Touch. Available on iTunes!

cbhattarai
Posts: 1
Joined: Thu Oct 25, 2012 6:27 am
Contact:

Re: Improving the Camera Recording Quality

Post by cbhattarai » Thu Oct 25, 2012 6:30 am

Thanks a lot for this info. I also wanted to ask that installing the ip cameras with DVR also helps in getting better video and image. Is that true?

viksyno
Posts: 1
Joined: Sat Apr 11, 2015 5:34 pm
Contact:

Re: Improving the Camera Recording Quality

Post by viksyno » Sat Apr 11, 2015 5:44 pm

Thanks for the info..... Really Helpful

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest